Finding your suitable readers for freezer exchanger is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for freezer exchanger including detail information and customer reviews. Let’s find out which is your favorite one.
738 reviews analysed
1. Frigidaire 216783200 Heat Exchanger Freezer
Description
Product Description
This is a genuine replacement part. The model number and name for the following item is: Heat Exchanger 216783200 Frigidaire compressor sealed system.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Heat Exchanger 216783200 Frigidaire compressor sealed system
2. Titan- 12V 120mm DC Double Rack Mount Ventilation Cooling Fan for Fridge Vent and Ventilation Grille with Speed Controller (120mm) TTC-SC22(B)
Feature
- DESIGN FOR VENT & GRILLE MOUNTING VENTILATION- Great for refrigerator vent & grille ventilation in your motorhome, camper van, camper truck, caravan or any cabinets.
- FLEXIBLE AND SMART SPEED CONTROL MODE- Auto Temperature Control/ 6-levels manual controller to adjust for particular needs
- ALL WEATHER ACCEPTABLE- IP 55 Waterproof &dustproof fan, perfect for outdoor use
- SILENT OPERATION- Take TITAN professional 9-blades kukri silent fan, this multi-purpose fan or fridge vent fan provides you the quietest operation experience without being disturbed.
- EASY INSTALLATION- Rack hook design for easy install on refrigerator vent
Description
-WARNING: Do not attempt to revise polarity to change the airflow direction. It would not revise the airflow direction. The airflow would blow out from the cross grille side of the fan. If you revise the polarity (positive to negative), the fan and controller would not work. Please connect the cable to the same polarity (positive to positive/ negative to negative)
The refrigerator should be installed on or close to the cooling fins of the refrigerator.
You should install the double fan in any case so that the extracted hot air can somehow escape outside, preferably through ventilation slots in the caravan. You can install the double fan in both the lower and upper ventilation shafts. However, we recommend the installation in the upper ventilation slots, because if your refrigerator is operated with gas, the burner is usually located near the lower ventilation slots and then the gas supply might be hindered by the double ventilator.
3. AC Infinity AIRTITAN T8-N, Crawlspace Basement Ventilator Fan, with Temperature and Dehumidistat Controller, IP-44 Rated, Intake
Feature
- A fan system designed to provide ventilation and moisture control for crawl spaces and basements.
- Reduce humidity to prevent mold growth while exhausting out odors and pollutants from your home.
- Programmable controller with corded probe, can adjust airflow in response to temperatures and humidity.
- Heavy-duty stainless steel frame with IP-44 rated fans to be highly resistant to liquids and dust.
- Includes Wall Adapter | Design: Intake | Dims.: 18 x 9 x 1.6 in. | Airflow: 240 CFM | Noise: 32 Dba
4. Koolatron 33 qt. Kargo Kooler
Feature
- Split-level cooler keeps food cold when driving
- Cooling system plugs into car’s 12-volt cigarette lighter
- Stands vertically or horizontally for use as a fridge or chest
- Holds up to 42 12-ounce soft drinks
- Measures 20 by 14 by 16 inches
- Split-level cooler keeps food cold when driving
- Cooling system plugs into car’s 12-volt cigarette lighter
- Wattage: 60 Watts
- Amperage: 4.5 Amps
- Stands vertically or horizontally for use as a fridge or chest
- Holds up to 42 12-ounce soft drinks
- Measures 20 by 14 by 16 inches
Description
With the Koolatron 33 qt. Kargo Kooler is the only way to travel. This super-versatile cooler/mini-fridge lets you take your own food and drinks in the car, on the road, and into a hotel room. It has built-in shelves, a massive 33-quart capacity, and a totally unique design that lets it sit safely in a horizontal or vertical position. Koolatron is a Canadian company with headquarters in Brantford, Ontario, a branch office in Orlando, Florida, and warehouse locations in Batavia, New York and in Rochester, Kent in the United Kingdom. Your satisfaction is important to Koolatron, and they value your trust. That’s why they’re committed to providing quality products and supporting every product they provide. Wheeled electric travel cooler with 12V power cord. Split-lid design promotes energy conservation and accessibility. Internal circulation fan and brushless motor. Dual shelves designed to fit in multiple positions. Cools up to 40° below ambient temperature. Dimensions: 19.25W x 13.5D x 16H inches.
5. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
6. Hycency Programmable Thermostat Outlet, Heating & Cooling Plug in Thermostat (White)
Feature
- Programmable Thermostat outlet: The thermostat outlet comes with heating and cooling mode. It is programmed by the remote control and the temperature control range is 32-158℉(0-70℃). Control distance reaches 66ft in the open area. Choice of ℉ or ℃ temperature display on LCD.
- Energy Saving: This hycency thermostat outlet saves energy by reducing wasted energy in your home. it can help save energy costs on heating or cooling and make your home not only Comfortable but energy efficient.
- No need installation: Plug and play, no installation or wiring, easy to use. plug your portable heating or cooling unit into the thermostat outlet, and you’re ready to go.
- Easy Operation: Remote control and thermostat outlet automatically match, then select heating or cooling mode and set the target temperature. thermostat will play with your home device. Built-in temperature sensor for accurate reading temperature.
- APPLICATION: The thermostat plug allows control any 120 volt device up to 15 amps. It can help you control the room temperature accurately. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater,etc.
Description
This Hycency programmable thermostat outlet is designed for
automatic control of electric heating unit or cooling unit. It consists of
2 parts: a thermostat outlet and a remote control. Backlight LCD
screen on the remote control for accurate data reading.
Temperature sensor is built in the remote control. it could
automatically detects the ambient temperature and send a signal to
the thermostat socket every 20-30 seconds. The thermostat socket
stops heating or cooling when the current temperature is equal to the
target temperature, provides comfort and energy saving.
Features:
1. Plug and play type, no need installation
2. Heating Mode and Cooling Mode switchable
3. LCD with green backlight
4. Display current temperature and target temperature
5. °C/°F switchable
6. Easy setting with memory function
7. High/Low temperature warning:
Low temperature: ≤0°C, current temperature shows LL
High temperature: ≥70°C, current temperature shows HH
8. Low battery warning: The symbol of battery is flashing when the battery voltage is lower than 2.7V
9. RF 433Mhz RF technology
10. Portable design, hold in hand/stand on table/wall mounted
Specification:
Color: White
Material: ABS+PC+Metal
Plug Type: USA Plug
Max Rating: 120V/15A/60Hz, 1800W Max
Transmission Frequency: 433.92MHz
Max. Range: 66ft in Open Area
Current Temp. Range: 0°C~70°C or 32°F~158°F
Target Temp. Range: 0°C~70°C or 32°F~158°F
Temperature Resolution: ±1°C/±1°F
Remote Control Power: 2 * AAA 1.5V Batteries (Battery is not included)
Notice:
There are 2 ways to reset your mode:
1. Reinstall the battery
2. Long press the ON or OFF, and then long press ON and OFF at the same time.
Package:
1 X Thermostat Outlet
1 X Remote Control (Battery is not included)
1 X User Manual
7. Hycency Thermostat Plug Temperature Controller with Timer Mode, Programmable Outlet Thermostat Set Differential Value to Keep Temperature in Desired Range
Feature
- Powerful Programming: This thermostat plug has heating mode and cooling mode, and with timer function. you can program time, temperature, and week in combinations as you need. For example, set differential value to maintain the desired temp range: you set the differential value to 2℉, target temp 80℉, heating mode. The device will turn on at 80-2=78℉, and turn off at 80+2=82℉. Equivalent to setting a temp range of 78-82℉. Temp differential value range: 0-4℉ or 0-4℃.
- Save Energy and Money: This thermostat outlet has powerful programming capabilities and can save about 30% energy consumption. thermostat saves energy costs on heating or cooling by adjusting the temperature.
- Create Convenient Life: Plug and play, no installation or wiring. Remote control built-in temperature sensor for automatic monitoring of ambient temperature, and send the signal to the plug through 2.4G wireless RF technology. Programming on remote control, no need to unplug the socket. Perfect for some hard-to-reach power outlets.
- Top Safety Protection: The Hycency wireless thermostat plug is made of flame retardant PC material and built-in child protection feature, its own relay control and fuse protection. Multiple protection ensures 100% security. Max current up to 15A, suitable for most heaters and coolers.
- Wide Range of Uses: This hycency thermostat is ideal for most heating appliances, such as infrared heater, tube heaters, fan heaters, floor heaters and electric radiator, electric oven, as well as many electric cooling devices.
Description
This thermostat can meet various timing and temperature requirement. It’s ideal for most heating
appliances and electric cooling devices. It consists of the socket and the remote control.
It allows you to remotely control your room temperature.
Powerful programming ability
This wireless thermostat have a powerful programming ability. You can program time,temperature,
and week in combinations as you need with a few simple steps! For example, you can program as
follows, Heating mode, 22:00-8:00, Monday to Friday, 80℉.
Features:
– Plug and play. No worry about wiring
– Time, week, temperature range can be programmed in combination
– Heating & cooling mode, timer mode
– °C/°F switchable
– Store setting after plug power off
– Set separate weekend/weekday programs
– Daylight saving time selection
– Low battery warning: The symbol of battery is flashing when the battery voltage is lower than 2.7V
– Current temperature correction and system reset function
Specification:
Power Rated: 120V/15A/1800W/60Hz
Temperature control range: 32.0℉~158.0℉(*0.0℃~70℃)
Temperature resolution: ±1℃ or ±1℉
Transmission frequency: 2.4Ghz
Maximum range: 66ft in open area
Package size: 4.64×4.21×2.75 in
Thermostat Weight : 3.45 oz
Controller Weight : 2.4 oz
Batteries: 2 AAA batteries required (Battery is not included)
Useful function
1. Current temperature correction. each remote has been calibrated before leaving the factory. we don’t
recommend this feature unless you have confirmed that the current temperature of the device is not accurate.
2. High and low temperature alarms
Low temperature: ≤0°C, current temperature shows LL
High temperature: ≥70°C, current temperature shows HH
Package:
1*Thermostat Plug
1*Remote Control (Battery not included)
1*User Manual
8. AC Infinity AXIAL S1225, 120mm Muffin Fan with Speed Controller, for Doorway, Room to Room, Wood Stove, Fireplace, Circulation Projects
Feature
- Quiet fans designed for doorway, wood stoves, room-to-room, fireplace, and circulation projects.
- Features a fan speed controller so you can optimize the airflow and noise for your application.
- Constructed of heavy-duty aluminum, the fans can withstand shocks and harsh environments.
- Complete kit includes fan guards, wall-mount screws, optional swivel brackets, and power plug cord.
- 120 x 120 x 25 mm ( 4.7 x 4.7 x 1 in. ) | Airflow: 20 to 69 CFM | Noise: 16 to 38 dBA
- Designed for custom DIY projects that require a controllable cooling and ventilation solution
- Features a heavy-duty aluminum fan which can be speed controlled
- Size: 120 x 120 x 25 mm ( 4.7 x 4.7 x 1-Inch ) | Airflow: 20 to 69 CFM | Noise: 25 to 38 dBA | Speed: 0, 700 to 2450 RPM | Bearings: Dual Ball
- Contents: (1) 120mm aluminum AC fan, (2) metal guards, (1) 2-Inch screw mounting set, (1) 6-Feet speed control unit
- May not be suitable for noise sensitive applications such as amplifiers and AV cabinets
9. DIGITEN Wireless Temperature Controller, Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe 3 Prong Plug Heating Cooling Mode for Fan Heater Greenhouse
Feature
- 【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). It can save all settings even if the power failure.
- 【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc.
- 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Free to switch between ℃/℉. Maintains stable room temperature and provides comfort and energy saving.
- 【ON/OFF manual button on the receiver】: Manually turn on/off the receiver remotely. LCD with backlight display reading accurately. Portable design, handheld/wall mounted.
- 【High Accuracy】: Receiver with 2m/6ft NTC highly accurate temperature probe, ambient temperature is detected automatically by thermostat outlet, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W
10. G-Works Gas Saver Plus Upgrade Cartridge Exchanger Anodize Duralumin
Feature
- Gas Saver PLUS: Save fuel and save resources by collecting remaining gas.
- New improvements have been made in 2020. Evaporative gas discharge button is included. The outlet located on the rear part and the special check button provide the optimum feeling of operation.
- Assembled brass inserts are designed to prevent thread wear. We have a high quality assembly system through precision CNC machining and developer manual work.
- G-WORKS company’s other products such as butane adapter, LPG adapter and lantern pole set can be used in various applications.
- Size & Weight: (W) 55 x (D) 20 x (H) 30.7mm, 38g / Material: Super Duralumin (anodizing), Brass / Country of origin: Korea
Description
Usage / Notice
1. Be sure to check the valve lock before assembling the gas container, and use it in a safe outdoor location where there is no fire.
2. Tighten the gas container you want to use based on the printing direction, and assemble the gas container with the remaining amount on the upper part.
The gas container at the bottom should have enough free space to accept the gas being transported.
3. If you put the gas container located at the lower part in the freezer for about 10 ~ 20 minutes, it will be cooled and the internal pressure and volume will be smaller than the remaining gas container. (The freezer and cooler can be used for easy operation without any additional vaporization.)
4. If the forced pressure difference cannot be made, close the valve and press the gas discharge button for 4 to 5 seconds to change the pressure of the lower vessel to the normal pressure and open the valve again. (When using the eject button, it is effective to have enough free space in the container located at the bottom)
5. If the remaining amount of columnar gas container is moved, tilt it more than 45 degrees so that the groove part which is connected with the adapter is facing downward.
6. When removing the gas container, separate it with the outlet of the container facing upward. (When disconnected in the upside down position, the minute leakage may increase)
7. Check the overcharge state by measuring the weight of the gas container after moving. There must be shaking.
The ideal filling amount is about 80% of the container capacity. Check the state of overcharging, and when filling it with no shaking, move the gas to the empty container in reverse, so that there is about 20% of the capacity of the container.
Conclusion
By our suggestions above, we hope that you can found Freezer Exchanger for you.Please don’t forget to share your experience by comment in this post. Thank you!
